sIMPLEk Pro Ebike Tuning for Brose | Drive S (Mag) | Drive C/T(F) | Specialized - ElectroDriving.com

Der Kauf erfolgt über Amazon

Price: €109.99
(as of Jan 08, 2025 20:05:24 UTC – Details)

Product Description

sIMPLEk Pro tuning module for Brose

Compatible with all Brose drives C | Drive T(F) | Drive S (Mag) | Specialized 1.2 (S/E)/1.3/2.0/2.1/2.2 speed limit of 25 km/h is moved. The actual speed remains readable, maximum speed, distance kilometres and total kilometres are displayed correctly. Speed limit for engine support can be set (see calibration totole)

Easy installation thanks to precisely fitting connector. These are self-constructions made using the high-quality 3D printing process. This makes the module easy to install. Not visible from the outside. In the standard configuration, the e-bike always starts with deactivated tuning without any intervention

______________________________

¹The actual speed is displayed via the second digit and decimal place of the speed display. The maximum speed and the distance indicators are displayed after approx. one minute at standstill.

The operation of the sIMPLEk Pro within the scope or Area of effect of the German Road Traffic Regulations is prohibited and not permitted.

The speed remains readable in tuning mode:

Up to 20 km/h, the speed is output normally. Above 20 km/h, it is displayed via the second digit and the decimal place. This means that the average speed in the display always remains within the inconspicuous realistic range. This trick has been in use with our modules for over 5 years and has proven itself well. Examples:

Shown 22.9 km/h corresponds to 29 km/h. Shown 23.4 km/h corresponds to 34 km/h. Shown 24.8 km/h corresponds to 48 km/h

The distance kilometres travelled are automatically added after one minute at a standstill. Thus, at the end of the tour maximum speed, distance and total kilometres are correct.

For this purpose, a one-time simple calibration is necessary, which starts automatically at the first commissioning: An increasing speed is displayed on the speedometer. As soon as approx. 10.0 km/h, the e-bike must be switched off and then switched on again. Now a speed increasing in small steps is displayed on the speedometer and it must be switched off at exactly 10.0 km/h.

‚

Easy to activate and deactivate even while driving:

Turn on the e-bike

Electric bike after it is fully booted off within 10 seconds

When switched on again, the tuning mode is active (signaled by the displayed 10.0 km/h) and remains active until the bike is switched off again.

Speed limit for engine support can be adjusted:

With the Standard Edition, the limit for engine support can be set by a calibration deviating from 10.0. The Nano Edition allows you to easily set the menu without re-calibration.

Add To Basket

Customer Reviews

4.4 out of 5 stars

—

Price

€109.99€109.99
—

Motor
Drive S (Mag) | Drive C/T(F) | Specialized Drive S (Mag) | Drive C/T(F) | Specialized

Pluggable (USB)

✓

Speed readable

✓

Display can be activated/deactivated

✓

Speed limit adjustable
In 2.5 km/h increments (see calibration table) In 2.5 km/h increments (see calibration table)

Compatible with Brose drives Drive S (Mag) | Drive C/T(F) | Specialized.
Speed limit is adjustable
The actual speed remains readable, maximum speed, distance kilometres and total kilometres are displayed correctly
Easy installation. Custom fit connectors Lediglich ein Stecker muss gezogen und der sIMPLEk zwischgeschaltet werden
In the standard configuration, the e-bike always starts with deactivated tuning without any intervention
Operation within the scope or area of effect of the StVO is prohibited and not permitted. Operation is intended exclusively on private properties and race tracks closed off for public transport. No liability is assumed for any current or future damage (indirectly and directly) caused by the commissioning of the sIMPLEk Pro. Use at your own risk.